Separator Disc Spacing Washer
Function group: Hardware
Ensures your disc stack is perfectly aligned. Even a slight deviation in disc spacing can lead to "fat carry-over" into the skim milk. Essential for maintaining 0.01% skimming precision.
Technical Specifications
| Material | Stainless Steel |
|---|---|
| Thickness | 0.1mm - 0.5mm |
About the Hardware group
Hardware covers the fasteners, mounts, feet and alignment items that hold the machine together and damp vibration. Missing or incorrect fasteners should be replaced rather than substituted with a similar-looking item.
Selection notes for this entry
- A material is stated for this entry: check the marking on the delivered part against it before fitting.
- Dimensional values are listed: measure the part you are replacing after cleaning and compare, rather than matching from a photograph.
Checks before you order
- Confirm the fastener type, thread and length against the one removed — similar-looking items are not interchangeable.
- Check mounts and feet for hardening, splitting or compression set.
- Replace missing fasteners rather than leaving a position empty.
Guides covering the Hardware group
- Which Part Is Worn? A Symptom-to-Part Map for Milk Separators
- Receiving Inspection Checklist for an Imported Milk Separator
Where this part fits
Parts in the same function group work together, so a fault that looks like one worn component can involve a neighbouring part in the same assembly. Before ordering, confirm the machine model, the assembly reference and the key dimensions against your own machine record.
Other parts in the Hardware group
- Anti-Vibration Rubber Support Feet (4-Pack)
- Separator Bowl Locking Nut
- Main Drive Shaft Coupling
- Power Switch Waterproof Boot
- Drive Motor Mounting Bolt Set (3-Pack)
- Stainless Steel Wing Nut for Float Tank
Confirm compatibility before ordering
- Model, assembly and the part name from your machine record.
- Voltage and frequency for powered components.
- Complete-machine photo, close-up photo and marking photo.
- Dimensions measured after cleaning.
- Quantity and destination country or port.
Use the parts inquiry checklist to prepare the request and keep the record with the machine.
Request pricing for this part · Back to replacement parts · Cleaning checklist · Browse machine catalog