Nylon Spout Cleaning Brush (Long-Reach)
Function group: Maintenance
Don't let milk fat build up in the curves of your spouts. Standard bottle brushes are too thick for the precision-tapered outlets of the ANDUUK series. This flexible tool reaches the internal "elbows" of the spouts where bacteria like to hide, ensuring a 100% sanitary milk path.
Technical Specifications
| Bristle Material | Food-Grade Nylon |
|---|---|
| Length | 250mm |
| Handle | Twisted Stainless Wire |
About the Maintenance group
Maintenance items are the tools and cleaning aids used to open, clean and care for the assembly without damaging it. Using the correct tool matters more than force on a bowl that has not been opened for some time.
Selection notes for this entry
- A material is stated for this entry: check the marking on the delivered part against it before fitting.
- Dimensional values are listed: measure the part you are replacing after cleaning and compare, rather than matching from a photograph.
Checks before you order
- Confirm the tool or aid is intended for the assembly on your machine.
- Check that it seats fully before applying force; a slipping tool damages the part it is meant to protect.
- Replace worn cleaning aids before they start marking milk-contact surfaces.
Guides covering the Maintenance group
- Milk Separator Cleaning and Reassembly: A Practical Daily Checklist
- Cleaning Is Not Sanitising: A Working Hygiene Routine for Milk Separators
Where this part fits
Parts in the same function group work together, so a fault that looks like one worn component can involve a neighbouring part in the same assembly. Before ordering, confirm the machine model, the assembly reference and the key dimensions against your own machine record.
Other parts in the Maintenance group
- Disc Cleaning Brush Set
- Disc Cleaning Scraper Tool
- Chassis Alignment Shim Kit
- Separator Bowl Polishing Paste
- Bowl Bottom Cleaning Pad Set
- Stainless Steel Cleaning Rack for Separator Discs
Confirm compatibility before ordering
- Model, assembly and the part name from your machine record.
- Voltage and frequency for powered components.
- Complete-machine photo, close-up photo and marking photo.
- Dimensions measured after cleaning.
- Quantity and destination country or port.
Use the parts inquiry checklist to prepare the request and keep the record with the machine.
Request pricing for this part · Back to replacement parts · Cleaning checklist · Browse machine catalog