Silicone Sealing O-Ring Set (3-Pack)
Function group: Consumable
Maintain a perfect vacuum seal with ANDUUK genuine silicone O-rings. These seals are engineered specifically for the AD-50/90 series to withstand the high centrifugal pressures required for efficient cream separation. ### When to Replace: * Visible cracking or hardening of the silicone. * Milk droplets appearing on the base of the machine during operation. * Loss of skimming efficiency due to pressure drops.
Technical Specifications
| Material | Food-Grade Silicone |
|---|---|
| Pack Size | 3 Units per Bag |
| Heat Resistance | Up to 120°C |
| Life Span | 6-12 Months (Typical) |
About the Consumable group
Consumables are the small items that are used up or replaced as they wear rather than repaired. They keep milk-contact surfaces in condition between service intervals.
Selection notes for this entry
- A material is stated for this entry: check the marking on the delivered part against it before fitting.
- Connection details are listed: confirm the mating thread or fitting on your machine, because similar-looking fittings are not interchangeable.
- The pack quantity is stated: order the number of packs you need rather than assuming a single piece.
Checks before you order
- Identify the item by its fitted position, not by appearance alone.
- Check whether the current item is worn through, swollen, discoloured or deformed.
- Confirm the quantity you actually consume per cleaning cycle before choosing a pack size.
Guides covering the Consumable group
- Milk Separator Cleaning and Reassembly: A Practical Daily Checklist
- Storing Spare Seals, Discs and Gaskets on a Small Dairy
Where this part fits
Parts in the same function group work together, so a fault that looks like one worn component can involve a neighbouring part in the same assembly. Before ordering, confirm the machine model, the assembly reference and the key dimensions against your own machine record.
Confirm compatibility before ordering
- Model, assembly and the part name from your machine record.
- Voltage and frequency for powered components.
- Complete-machine photo, close-up photo and marking photo.
- Dimensions measured after cleaning.
- Quantity and destination country or port.
Use the parts inquiry checklist to prepare the request and keep the record with the machine.
Request pricing for this part · Back to replacement parts · Cleaning checklist · Browse machine catalog