Replacement Disc Stack Separator Spacer
Function group: Separation Unit
A spacer should not be selected by outside diameter alone. The correct part depends on the bowl assembly and disc stack. Compare the old spacer, measure its key dimensions, and provide the model before ordering to avoid changing the separation geometry.
Technical Specifications
| Material | Stainless Steel |
|---|---|
| Use | Disc Stack Alignment |
| Order Check | Disc stack and model required |
About the Separation Unit group
The separation unit is where whole milk is split into cream and skim milk: the disc stack and the individual discs that form the separating channels. Damage here shows up as poorer separation, an unbalanced bowl, or noise at speed rather than as an obvious leak.
Selection notes for this entry
- A material is stated for this entry: check the marking on the delivered part against it before fitting.
Checks before you order
- Keep the discs in the order they were removed — mixing the stack changes separation.
- Inspect each disc for bends, burrs and blocked holes, and set damaged discs aside rather than refitting them.
- Check that every spacer and washer is present and seated flat before closing the bowl.
Guides covering the Separation Unit group
- How a Separator Bowl Assembly Works: Discs, Spacers and Seals
- Which Part Is Worn? A Symptom-to-Part Map for Milk Separators
Where this part fits
Parts in the same function group work together, so a fault that looks like one worn component can involve a neighbouring part in the same assembly. Before ordering, confirm the machine model, the assembly reference and the key dimensions against your own machine record.
Other parts in the Separation Unit group
- Stainless Steel Separator Disc Stack
- Replacement Bowl Disc (Single - Plain)
- Motor Cooling Fan Blade (High-Static)
Confirm compatibility before ordering
- Model, assembly and the part name from your machine record.
- Voltage and frequency for powered components.
- Complete-machine photo, close-up photo and marking photo.
- Dimensions measured after cleaning.
- Quantity and destination country or port.
Use the parts inquiry checklist to prepare the request and keep the record with the machine.
Request pricing for this part · Back to replacement parts · Cleaning checklist · Browse machine catalog