Milk Cream Electric Centrifugal Separator - 50 L/h
Cream Separator - 50 L/h
Electric Milk Cream Separator Stainless Steel Centrifugal Separator 50L/H Fresh Milk Dairy Processing Equipment
The ANDUUK electric centrifugal cream separator turns whole milk into cream and skim milk quickly and cleanly, with no standing time and no additives. Its compact footprint fits a dairy workshop bench, a farmstead creamery counter or a food shop back room. Daily cleaning is a simple warm-water rinse of the separator bowl, so the unit is ready for the next milking in minutes. Available on 110 V or 220 V supply (please specify voltage when ordering); higher-capacity 90 L/h and 120 L/h versions are available on request. Every unit ships with a machinery test report and video outgoing inspection, and after-sales video technical support is provided under the 1-year warranty on core components.
Specifications
| Throughput | 50 L/h（90 L/h, 120 L/h） |
|---|---|
| Type | Milk / cream centrifugal separator |
| Model number | AD-50 |
| Power | 200 W |
| Voltage | 220 V / 110 V |
| Weight | 7.5 kg |
| Dimensions (L x W x H) | 380 x 380 x 230 mm |
| Place of origin | Hebei, China |
| Warranty | 1 year on core components (motor) |
| Minimum order | 1 unit |
| Lead time | About 20 days for quantity 100 (confirm with sales) |
| After-sales service | Video technical support |
Reading the specification
The values below are the ones stated for this entry. They are what a quotation is built against, and what should be checked against the machine on arrival.
- Model designation: AD-50. Parts and documents are matched against this designation, so it is the first thing to record when the machine is installed.
- Stated throughput: 50 L/h（90 L/h, 120 L/h）. This is a rated figure, not a guarantee of finished output. Actual throughput depends on milk temperature, fat content, how the cream screw is set, and how quickly the bowl is emptied.
- Motor rating: 200 W. The motor is a core component, and the electrical supply on site has to match the build supplied — not only the voltage, but the circuit protection the installation requires.
- Electrical configurations listed: 220 V / 110 V. The build supplied for your order is confirmed on the quotation; state your local supply and plug type when you inquire.
- Unit weight: 7.5 kg. Worth knowing before the machine is moved onto a bench or carried up a stair — plan the lifting point rather than improvising it.
- Dimensions: 380 x 380 x 230 mm. Allow clearance for the outlets, for opening the bowl, and for the operator to stand safely while the machine runs.
Sizing it against a working session
At the rated 50 L/h（90 L/h, 120 L/h）, a four-hour session covers roughly 20360480 litres of arithmetic — before any allowance for setup, cleaning, or the slower pass at the end of a batch.
That is arithmetic on the stated rate, not a performance claim. If your batches are large, the practical question is how many sessions you are willing to run rather than how fast a single pass can be pushed. The capacity selection guide covers how to compare a rated figure against a real working day.
What to confirm before ordering this model
- The electrical build actually supplied for your destination, in writing.
- The documents included with the order, and which are not.
- The commercial terms that apply to your quantity and destination.
- That the model designation on the quotation matches the machine you are being offered.
Replacement Parts
- Replacement Bowl Assembly for AD-50/90
- Silicone Sealing O-Ring Set (3-Pack)
- Stainless Steel Separator Disc Stack
Browse all replacement parts · Read the cleaning and reassembly checklist
Product gallery
