Milk Cream Electric Centrifugal Separator - 50 L/h
Cream Separator - 50 L/h
Electric Fresh Milk Separator Household Cream Separating Machine with Low Noise 12V 50L/H Capacity
The ANDUUK electric centrifugal cream separator turns whole milk into cream and skim milk quickly and cleanly, with no standing time and no additives. Its compact footprint fits a dairy workshop bench, a farmstead creamery counter or a food shop back room. Daily cleaning is a simple warm-water rinse of the separator bowl, so the unit is ready for the next milking in minutes. Available on 110 V or 220 V supply (please specify voltage when ordering); higher-capacity 90 L/h and 120 L/h versions are available on request. Every unit ships with a machinery test report and video outgoing inspection, and after-sales video technical support is provided under the 1-year warranty on core components.
Specifications
| Throughput | 50 L/h（90 L/h, 120 L/h） |
|---|---|
| Type | Milk / cream centrifugal separator |
| Model number | AD-50 |
| Power | 200 W |
| Voltage | 220 V / 110 V |
| Weight | 7.5 kg |
| Dimensions (L x W x H) | 380 x 380 x 230 mm |
| Place of origin | Hebei, China |
| Warranty | 1 year on core components (motor) |
| Minimum order | 1 unit |
| Lead time | About 20 days for quantity 100 (confirm with sales) |
| After-sales service | Video technical support |
Reading the specification
The values below are the ones stated for this entry. They are what a quotation is built against, and what should be checked against the machine on arrival.
- Model designation: AD-50. Parts and documents are matched against this designation, so it is the first thing to record when the machine is installed.
- Stated throughput: 50 L/h（90 L/h, 120 L/h）. This is a rated figure, not a guarantee of finished output. Actual throughput depends on milk temperature, fat content, how the cream screw is set, and how quickly the bowl is emptied.
- Motor rating: 200 W. The motor is a core component, and the electrical supply on site has to match the build supplied — not only the voltage, but the circuit protection the installation requires.
- Electrical configurations listed: 220 V / 110 V. The build supplied for your order is confirmed on the quotation; state your local supply and plug type when you inquire.
- Unit weight: 7.5 kg. Worth knowing before the machine is moved onto a bench or carried up a stair — plan the lifting point rather than improvising it.
- Dimensions: 380 x 380 x 230 mm. Allow clearance for the outlets, for opening the bowl, and for the operator to stand safely while the machine runs.
Sizing it against a working session
At the rated 50 L/h（90 L/h, 120 L/h）, a four-hour session covers roughly 20360480 litres of arithmetic — before any allowance for setup, cleaning, or the slower pass at the end of a batch.
That is arithmetic on the stated rate, not a performance claim. If your batches are large, the practical question is how many sessions you are willing to run rather than how fast a single pass can be pushed. The capacity selection guide covers how to compare a rated figure against a real working day.
What to confirm before ordering this model
- The electrical build actually supplied for your destination, in writing.
- The documents included with the order, and which are not.
- The commercial terms that apply to your quantity and destination.
- That the model designation on the quotation matches the machine you are being offered.
Replacement Parts
- Replacement Bowl Assembly for AD-50/90
- Silicone Sealing O-Ring Set (3-Pack)
- Stainless Steel Separator Disc Stack
Browse all replacement parts · Read the cleaning and reassembly checklist
Product gallery
